Our Services

Hydrostatic High Pressure Testing Chamber

Hydrostatic pressure testing is a energetic process that is used to ensure the integrity and safety of various equipment and structures, especially those which into contact with liquids or gases. The method of testing comprises of subjecting the object to be tested under examination. An increased internal pressure by filling it with a liquid, typically water, carefully monitoring the pressure and considering any potential leaks or weaknesses, hydrostatic pressure testing helps identify and diminish potential hazards, prevent failures that cost much thereby ensuring compliance with industry standards as well. Hydrostatic high pressure testing is the method for testing pressure containers to maintain safety standards and sturdiness over a period of time. They are initially tested using the hydrostatic test chamber. These are then revalidated as per the standards.

The hydrostatic pressure test is conducted on pipelines, gas cylinders, boilers and fuel tanks and so on for strength and leaks. Pressurization of the vessel to the specified test pressure is done first and then the pressure is tested by shutting off the supply valve and observing. While the strength is usually tested by measuring the level of permanent deformation of the container, low weight vessels are ordinarily tried employing a water coat test. The vessel is visually examined for escapes and after that in a container filled with water, and in which they alter in volume of the vessel which can be measured, by checking the water level in a calibrated tube. The vessel is at that point pressurized for a specific period; the extension will is then measured by perusing off the sum of fluid that has been constrained into the measuring tube by the volume increment of the pressurized vessel.

The vessel is at that point depressurised, and the lasting volume increment due to plastic misshaping while under weight is measured by comparing the ultimate volume within the measuring tube against the volume recorded before pressurisation. Hydrostatic tests are conducted under the limitations of either the engineering or the consumer specification. The testing vessel is filled with an almost incompressible fluid it is then pressurised to test pressure, and at the same time observed for leaks or perpetual changes in the shape. Hydro testing of pipes, pipelines and vessels is performed to uncover faulty materials that have overlooked prior revealing, ensuring that any leftover flaws as insignificant enough to allow unceasing operation. Pressure testing performed in a chamber is done by balancing changes in the measured pressure against the theoretical pressure that is calculated from changes in the measured temperature of the test section. Finally the statistics required to specify the test is engraved onto the cylinder which includes the design standard, serial, and the manufactured date. After testing in a chamber, the vessel or its nameplate will be stamp marked mentioning the date of the successful test. Our experts in testing section carry out the testing procedures immaculately and leave no stone unturned to achieve the desired results.